Skip to main content

The Back Stoop

Creative Post name huh?  A couple weeks ago I made a minor moderation to the front stoop, so you might think that prompted this most recent project.  Nope.  This project has been planned since last year, just finally reached it on the (in my head) priority list.  So, let's go!

As is my mantra throughout this blog, I didn't take many "before" pictures when 173 was first purchased.  The closest I have for the back stoop is a series of "first time around" shots from 1991:




I think that was toward the end of the "beige" years, and I also think that was when we were changing 173 from the white-and-green theme to white-and-brown.  I think.  Either way, we were pretty pleased with the look at the time.  If you look closely in the back by the old fence, you can see the remnants of the  old wooden wheelbarrow that came with the house.  Obviously the last picture there was in the fall, and we had bought a bale of hay and pumpkins for that fall-feeling.  Good times.

That beige wasn't paint, it was a semitransparent stain from Behr.  It looked really crisp but within a couple years it was looking pretty worn.  Besides that, I had shingled the back porch exterior so we decided to go with a dark brown - this time it was paint.



Once again, we were pretty pleased.  But, that stoop had to be painted every year, and the winter and salt were brutal on the decking.  


And of course, 173's color scheme has changed so the brown just doesn't cut it anymore!


On top of that, the railings had really loosened, and the stoop as a whole was just kind of embarrassing.


Aaaand...it was time.  So off to Lowes and $50 later I picked up this belt sander:

I had an old Craftsman belt sander, but no matter what I did I couldn't keep the belt aligned.  So I did (minimal) research and found that this sander had some auto-mechanism that kept the belt aligned, good enough for me!  And really, it did a nice job:


The next step was putting on new steps.  All these years and I didn't know the steps were free-standing!  That made it much easier to work on them.  


One of the things I really wanted to do was save the stringers if at all possible.  It was:


The stringers were in pretty good shape, just one part was a little punky so I married a little piece of pressure treated 2x4 - just in case.


As is my wont, before doing all this I did a good bit of research, and read somewhere that putting tar paper on the stringer treads was a good idea.  Of course I always have some lying around so...


Then it was just a matter of putting on the steps and risers:


I know the right hand side of the treads are hanging over a bit too much, but that really was intentional.  The idea was it would help (no delusions here - just help) keep some of the moisture away from that bottom of the stringer, and give a little more space for plants (you'll probably see that next summer).

Then came the posts and rails.  Before I get there, I gotta show you these things:


They cost about $7 per pair, and they go here:


They make railings so incredibly secure, cut installation time down, and saved me from splitting the rails when screwing them to the posts.  So, I first went with a 2-rail look:



After getting them all installed, I stood back, snapped a couple pics and thought it just looked sparse, and with that much post sticking up, just looked weird.  So I rearranged and added a rail, and I think it came out much better:


That left the doors (with the lattice).  There's about 4 feet of headroom under the stoop, and about the same under the entire back porch, which gives us a lot of storage.  The framing around the doors is good, so I just sanded that, but the doors themselves were showing their age structurally.  So I decided to make new doors.  This was a fun project, and afforded me one of the few times I actually got to use my Kreg tool:


I'm sure I'm not the only one this has happened to...I ran out of the "proper" length of Kreg screws, and not wanting to take the time to go to the store just for that - I used a slightly longer screw - dumb.  I ended up having a few screws come out the front of the frames, so I had to change them, and fix the front (and while I was at it I caulked the joints):


Here they are (before fixing the screws):


Now I'm at a standstill.  The pressure treated wood needs to dry a little before staining and painting, and I thought I'd put the new lattice in after painting.  All of which means it will be a couple weeks before the project is complete, but for now...great progress!


Bonus Picture:

Always the fingers!


Comments

Popular posts from this blog

The Back Stoop - Done! (Well, for the most part)

As a reminder, when I started the back stoop, which seems like forever ago, it looked like this:


So it was time.  At the end of the last post, the stoop was looking like:

It was getting there.  Really, all I had to do was paint, but if you know me - I......hate.....painting!  Stain on the floorboards and two coats of B-I-N primer, and two coats of paint later, here it was (of course Linus supervised throughout):

Oh, just a quick step backward - here's the stoop without the doors.  As you can see the mower and some other things are stored below:

What you can't see here is that the storage runs the entire length of the back porch, more storage is always good!  Anyway, I showed you in the first post about the stoop that I had built the doors, so all that was left was to paint them (of course - ugh) and hang them.  

Aaahhhhhh, so much better - or was it?  The pad outside the stoop looked like, well Ma will be reading this so - it looked like (insert your own word).  I hate when yo…

The Kitchen - Part 3: Walls

The walls were solid, but paint was peeling everywhere, and there were some rough spots throughout...


If you look closely at the picture above (and below for that matter, you can see the spackle in pink.  And, this next picture shows where there was a large dip in the wall that leads to the dining room.  It was significant enough that it made the ceiling look horrible, and I had to put so much spackle on that I figured I better put some tape in it:


I used this stuff:

I liked it because it went on pink, and when it was dry it turned white, taking the guessing game out of it.  Besides that, as to quality - well, it worked just like any spackling I suppose.
Then there was the area behind the stove - what a mess.  All these years there was this big piece of metal on the wall behind the stove, and a large piece of melamine on the wall next to it:

And here's the sheet of metal behind it:

Luckily it all came off pretty easily, but how ugly is that glue??

Only one thing to do - cover it:

Made at 173: Dining Room Table

OK, so this table wasn't exactly made at 173, but it was re-done!  Bear with me a minute.  For years the dining room was just missing something...